Adhesive nickel bath JE303, 1,5 l
The adhesive nickel bath JE303 deposits thin and strongly adhesive nickel layers, especially on stainless steel and passive base materials.
The use of the adhesive nickel bath ensures excellent adhesion and an even structure of the subsequent layer. The adhesive nickel bath is mainly used to activate stainless steel, molybdenum and tungsten, with a layer thickness of a few nanometers being sufficient.
Special information:
The adhesive nickel bath contains hydrochloric acid and is not suitable for light metals and tin. The bath should always be well covered, as the hydrochloric acid vapors have a corrosive effect on steel and other materials.
Operating data
- Nickel content 50 g/L
- Hydrochloric acid content 20 – 40 g/L
Working conditions
- Voltage 2 – 6 volts
- Bath temperature 18 °C
- Exposure time 30 seconds to 5 min.
- Anode material nickel
- Bath material PPH, glass
- Bath movement only for very long exposure times
Precipitation data
- Nickel 99.9%
- Density 8.9 g/cm2
Details
- Contents: 1,5 l
- Dangerous goods: Yes (Shipping method follows legal regulations) Show more
Sales unit: 1
Available ⬤
⬤ Delivery as soon as possible
No longer available ⬤
Recommendations
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available
⬤ Available
⬤ Delivery as soon as possible
⬤ No longer available