Gold plating bath Wilaplat 750, SC, acidic, with 4 g Au/l (ready for use 1 litre)

Product information "Gold plating bath Wilaplat 750, SC, acidic, with 4 g Au/l (ready for use 1 litre) "

These acid electrolytes are used for the gold plating of non-ferrous metals and silver alloys. The spectrum of platable materials (e.g. steels) can be considerably increased by first using the Wilaplat AC3 preplating gold bath (N° 311756).

Under optimal conditions, high gloss, durable adhesive gold layers with a thickness of up to 10 μm can be achieved.

Bath 750 SC creates a yellow shade (fine gold).

Application

Wipalat Bright Gold Plating Baths 750 can be used in conventional gold plating units such as the Wipalat-System. As required, the pH value can be adjusted with citric acid or corrosive soda. Before starting the procedure, the surfaces to be electroplated must be cleaned and free of grease.

Operating Data

Gold content: 4 g/l
Temperature: 20 - 30 °C
Exposure time: 10 - 45 minutes
Voltage: 2,8 - 3,5 volts
Current density: 1,0 - 2,5 A/dm2
Deposition rate: 22 mg/Amin
pH value: 3,5 - 4,5
Agitation: Agitation of electrolyte or work piece
Anodes: Platinized titanium
Tub material: Glass, acid-resistant plastic

Deposition Data

Density: 16 - 17,5 g/cm3
Hardness: 120 - 145 HV
Layer thickness: < 10 μm

Details

Contents: 1 l
Dangerous goods: Yes (Shipping method follows legal regulations)
Dangerous goods from: 1
Product area: Adhesives, lubricants & chemicals (hazardous material)
Prohibited chemicals regulation: Signed chemical prohibition order necessary
Properties: Ready to use
Shape: Gold plating bath
Suitable for: Fine gold, Non-ferrous metals, Silver alloys
Weight (kg): 1